چسب سیلیکون کافوتر مدل K-5211 وزن 60 گرم

60 گرم

Introduction
The surface to be coated is cleaned, oil stains are removed, and the thermally conductive silicone ester is directly extruded to uniformly coat the surface to be coated. The coating method can be applied by brushing, squeegeeing or roller coating as required.
K-5211 thermal grease is produced using imported raw materials and formulas. It is made of a paste grease made from a combination of metal oxides and organosilicon with good thermal conductivity and insulation properties. Good electrical insulation, wide operating temperature (operating temperature -50°C～+200°C), good stability, lower consistency and good workability. This product is non-toxic, non-corrosive, tasteless, dry, and insoluble.
Specification
Exterior : White paste
Penetration (1/10mm, 25°C) : 260～300
Specific gravity (g/cm3) : 1.9 to 2.1
Oil Dispersion (%, 200°C, 8h) : ≤2.0
Volatile (%, 200°C, 8h) : ≤2.0
Breakdown voltage strength (kv/mm) : ≥10
Volume resistance (Ω.cm) : 4×1014
Thermal conductivity (w/m·k) : ≥1.2